-
Engine, Honda K20/K24, KPower Industries
KPower 86 Swap Oil Pan (Toyota GT86)
Built out of .100” thick aluminium and tig welded inside and out, our road race oil pan is the answer for your K24 86 swap.
This oil pan offers some major…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 86 Fuel Pump Relay (Toyota GT86)
As of November 2022, all 86 electronics packages ship with this fuel pump relay kit. If you have an older kit, this is an easy addition.
KPower’s original wiring simply deleted…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower DIY K20 Oil Pick Up Kit
Are you doing a custom RWD K-swap? If so, this do-it-yourself oil pickup kit might be just what you need. After years of customers buying just our pickups separately and…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Complete 86 Swap Package (Toyota GT86)
Here it is: the industry’s first all-in, complete engine swap package for a K series. KPower have carried out the development and a huge amount of testing, making changes and…
Select optionsQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 86 Engine Wiring Harness (Toyota GT86)
The motorsports grade K-series to 86 engine wiring harness is a work of art, both in design and construction. KPower spared no expense in bringing you the ultimate engine harness…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Haltech Single Channel Wideband Controller And Sensor (Toyota GT86)
This wideband sensor and controller pairs with the rest of the KPower 86 electronics and allows the user the ability to increase the functionality of a Haltech ECU by using…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 86 Plug And Play ECU Jumper Board And Harness (Toyota GT86)
The KPower 86 plug-and-play ECU jumper board and harness keeps the wiring of your K-swap tidy and straightforward under the dash.
The supplied ECU jumper board mounts inside the factory 86…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Miata Wiring Conversion Harness for Hondata Pro
KPower’s wiring conversion harness makes it easy to wire a Honda K series into your Miata (MX5).
It’s designed to pair with Hondata Kpro, which needs to be installed in a…
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries
KPower E30 Oil Pickup Tube V2
KPower’s K swap E30 pickup tube is now available separately. It must be paired with the V2 oil pump housing, found here.
One required per vehicle.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower -16 Orb to 1.25″ Barbed Fitting
This -16 AN O-ring to 1.25″ barbed fitting is standard in KPower’s K24A2 and K24Z3 upper coolant necks, and is now available separately here.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower K20 Type S Oil Pump Pickup Adapter Housing, V2
KPower’s innovative oil pump pickup adapter is a key component in all K series engine swap packages that have been offered since 2014.
This is KPower’s revised ‘V2’ version which is…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower K Series Map Sensor Plug Extension
In order to simplify the K swap wiring, KPower are now offering this extension harness for the K series MAP sensor. Now there’s no need to cut and splice your…
Add to basketQuick View -
Engine, KPower Industries
KPower Idle Air Control Valve Mounting Block
If you’ve deleted your factory K series idle air control valve (IACV) due to clearance issues, you may notice that your engine idles very low on start-up. This is common…
Select optionsQuick View -
Engine, Honda K20/K24, KPower Industries
KPower B Series TPS Jumper Harness
In order to simplify the K swap wiring, KPower offers jumper wiring harnesses that allows you to connect a B series/S2000 TPS to your K series harness without any cutting,…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower B Series Throttle Body Gasket (Honda K20/K24)
If you want to eliminate potential vacuum leaks on your K-swapped car equipped with a B series 74mm throttle body, this gasket is for you. KPower has deleted the unnecessary…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 74mm Bosch Drive-By-Wire Throttle Body Adapter, V2
By popular request, KPower designed a throttle body adapter that makes it easy for customers running the KPower intake manifold to install a drive-by-wire (DBW) throttle body with the correct bore size. This…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 50-Degree VTC Gear (Honda K24)
This intake cam gear is a must-have for making mid-range power in a K24A2. It provides a 50 degree range of camshaft motion, instead of the stock 25 degree gear.
If…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 1/2″ NPT to 3/8″ Barbed Straight Fitting
This 1/8″ NPT to 3/8″ barbed fitting is perfect for attaching the IACV and brake booster hoses to your KPower intake manifold.
Add to basketQuick View -
Engine, KPower Industries
KPower 1/2″ NPT to 5/8″ Barbed Straight Fitting
This 1/2″ NPT to 5/8″ barbed straight fitting is included in KPower’s K24Z3 upper coolant necks and TracTuff K20A2 upper coolant necks.
One required per coolant neck.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 1/2″ NPT to 5/8″ Barbed 90 Degree Fitting
This 1/2″ NPT to 5/8″ barbed 90 degree fitting is included in KPower’s K24A2 upper coolant necks and all RBB style intake manifolds.
One required per coolant neck.
Add to basketQuick View