-
Engine, Honda K20/K24, KPower Industries
KPower 1/2″ NPT Plug
This 1/2″ NPT plug is used to delete the upper heater hose from any KPower coolant necks.
One required per delete.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 1/2″ NPT to 3/8″ Barbed Straight Fitting
This 1/8″ NPT to 3/8″ barbed fitting is perfect for attaching the IACV and brake booster hoses to your KPower intake manifold.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 1/2″ NPT to 5/8″ Barbed 90 Degree Fitting
This 1/2″ NPT to 5/8″ barbed 90 degree fitting is included in KPower’s K24A2 upper coolant necks and all RBB style intake manifolds.
One required per coolant neck.
Add to basketQuick View -
Engine, KPower Industries
KPower 1/2″ NPT to 5/8″ Barbed Straight Fitting
This 1/2″ NPT to 5/8″ barbed straight fitting is included in KPower’s K24Z3 upper coolant necks and TracTuff K20A2 upper coolant necks.
One required per coolant neck.
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower B Series Throttle Body Gasket (Honda K20/K24)
If you want to eliminate potential vacuum leaks on your K-swapped car equipped with a B series 74mm throttle body, this gasket is for you. KPower has deleted the unnecessary…
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries
KPower K to B TPS Throttle Body Adapter
If you’d like to install a K Series Acuity TPS on one of KPower’s 74mm B Series Throttle Bodies, you’ll need this handy adapter to make it all work.
Just remove…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Idle Air Control Valve Block Off Plate
If you are using the KPower intake manifold and would prefer not to run an idle air control valve (IACV), use this laser cut block off plate and supplied hardware…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower B Series TPS Jumper Harness
In order to simplify the K swap wiring, KPower offers jumper wiring harnesses that allows you to connect a B series/S2000 TPS to your K series harness without any cutting,…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower K Series Map Sensor Plug Extension
In order to simplify the K swap wiring, KPower are now offering this extension harness for the K series MAP sensor. Now there’s no need to cut and splice your…
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries, Transmission
KPower Slim Flywheel Dust Shield
KPower’s slim dust shield is included in the KPower E30 Package, but is suitable for most RWD K swaps using a BMW gearbox. The OEM style shield is not compatible…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower -16 Orb to 1.25″ Barbed Fitting
This -16 AN O-ring to 1.25″ barbed fitting is standard in KPower’s K24A2 and K24Z3 upper coolant necks, and is now available separately here.
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries
KPower K Series Heater Port Adapter (Honda K20/K24)
KPower’s K series Heater Port Adapter allows the black heater hose hard pipe to be deleted and replaced with a standard 5/8″ heater hose.
This offers a much cleaner heater hose…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 86 Fuel Pump Relay (Toyota GT86)
As of November 2022, all 86 electronics packages ship with this fuel pump relay kit. If you have an older kit, this is an easy addition.
KPower’s original wiring simply deleted…
Add to basketQuick View -
Engine, Honda K20/K24, KPower Industries
KPower 74mm Bosch Drive-By-Wire Throttle Body Adapter, V2
By popular request, KPower designed a throttle body adapter that makes it easy for customers running the KPower intake manifold to install a drive-by-wire (DBW) throttle body with the correct bore size. This…
Add to basketQuick View -
Engine, KPower Industries
KPower Idle Air Control Valve Mounting Block
If you’ve deleted your factory K series idle air control valve (IACV) due to clearance issues, you may notice that your engine idles very low on start-up. This is common…
Select optionsQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Acuity Hall-Effect K Series TPS (Honda K20/K24, universal)
The Acuity Hall Effect K series throttle position sensor is KPower’s new go-to TPS option. While the OEM B Series TPS is much more reliable than the OEM K Series…
Select optionsQuick View -
Engine, Honda K20/K24, KPower Industries
KPower K20A2-Style Upper Coolant Neck (Honda K20/K24, universal)
KPower’s upper coolant neck is a fantastic solution for customers using a K20A2 style head with their swaps.
If you’re familiar with the K series heads, you know that once you…
Select optionsQuick View -
Engine, Honda K20/K24, KPower Industries
KPower Upper Coolant Neck (Honda K24A2)
The KPower upper coolant neck for the K24A2 head is the ultimate solution for your Honda K-swap plumbing needs.
If you’re familiar with the Honda K series heads, you know that…
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries
KPower K20/K24 Fuel Rail
The KPower Industries fuel rail is here! They partnered with their friends at Karcepts to create this beautiful fuel rail – the end result is the perfect touch for any…
Add to basketQuick View -
E30, E30 M3, Engine, Honda K20/K24, KPower Industries
KPower E30 Oil Pickup Tube V2
KPower’s K swap E30 pickup tube is now available separately. It must be paired with the V2 oil pump housing, found here.
One required per vehicle.
Add to basketQuick View